Add a dashcam to a MyGeotab vehicle

In order to work with Surfsight in MyGeotab you need to first assign each AI-12 dashcam to a MyGeotab vehicle.

Note

Once configured in the portal, the vehicle must be turned on and the dashcam must be online in order to view live video.

Note

See Who can view data in MyGeotab to make sure you've completed prerequisites.

  1. From the Surfsight add-in, go to the Vehicles area.

    surfsight-add-in-vehicles.png
  2. From the top of the Vehicles page, click Add Camera.

    vehicles-page-add-camera.png

    The Add Camera window opens.

    add-camera.png
  3. Enter the dashcam IMEI number.

    Note

    The IMEI number can be found on the sticker on the dashcam itself or on the back of the dashcam box.

  4. From the Vehicles drop-down list, select the vehicle with an active GO device to which the dashcam is associated.

    add-camera-select-vehicle.png
  5. Click Ok from the top of the page to save the dashcam details.

    A confirmation message pops up and when you click Confirm, you are redirected to the Vehicles list. Having had the dashcam successfully attached to it, the relevant vehicle now appears in the list.

Was this article helpful?
0 out of 0 found this helpful