Set the dashcam WiFi connection using a QR code Rachel Cheyfitz April 11, 2021 05:00 sidebar. To connect the AI-12 dashcam to WiFi, make sure you have the dashcam with you, as well as access to the relevant MyGeotab portal account. Note If you connect the dashcam to a WiFI hotspot in your vehicle instead of using a SIM card, the time stays on GMT and does not switch to local time. To connect the dashcam to WiFi: Create a WiFi QR code Connect to the WiFi with the QR code Create a WiFi QR code sidebar. From the Surfsight add-in, go to the Vehicles area. Click WiFi from the top of the page. The WiFi window opens. In the SSID field, enter the name of the WiFi network to which you want to connect the camera. Select the Encryption relevant to your network from the drop-down list. In the Key field, enter the password of your WiFi. Click Generate. A QR code opens on your screen. Connect to the WiFi with the QR code sidebar. Turn on the dashcam. Go to the dashcam Settings. Select WiFi. Toggle the button to turn on the WiFi connection. When enabled, a list of available networks appears on the screen. Press Connect to a Different Network. The camera beeps several times. Point the camera at the QR barcode on the screen of your computer to scan the code. The camera connects to the WiFi network.