If you are not installing the dashcam in a vehicle or installation is aborted, it's important to power off the dashcam correctly so that battery resources are not used unnecessarily.
To power off, see To power off the dashcam.
There are several ways to restart (reboot) the dashcam:
A manual restart (reboot) retains the user password and user settings. The SD card is not affected.
There are two ways to do a manual restart (reboot): from the dashcam or from the Partner Portal.
Method 1: from the dashcam
-
Open the SD card cover.
-
On the side of the dashcam, short press the Reset button (pin hole).
The dashcam shuts down and restarts.
Method 2: from the Partner Portal
-
From the Devices area, select the device and click the three-dot menu.
-
Click Reboot. A confirmation window pops up.
-
Click OK. The device restarts.
A factory reset restores the factory default settings and deletes the user password and user settings. The SD card is not affected.
To perform a factory reset, see Factory reset of the dashcam.
Note
For more information on powering on, see: A1-12 Connect the dashcam to an OBDII port for power and Connect the AI-12 dashcam to a power source
. To power off the dashcam:
-
When you are in the parked vehicle with the parking brake on, the ignition on, and the door closed, press the touchscreen of the dashcam to view the PIN screen.
-
Enter the default PIN 3333 to unlock the dashcam for the first time, or your own PIN subsequently.
Note
See Set and manage your dashcam PIN if you need help with your PIN.
The screen unlocks and the menu appears.
-
Press Settings.
-
In the settings menu, choose the option appropriate for your dashcam:
-
For the AI-12 dashcam:
-
Scroll down and press Power Off.
A confirmation window pops up.
-
Follow the instructions on the screen to first disconnect the power cable, and then press OK on the screen to power off the dashcam.
Important
Complete this step in order to prevent the dashcam from restarting. If the dashcam does restart, repeat this step to avoid draining the battery.
If a tamper-proof case is installed on the dashcam, you cannot disconnect the power cable. Press OK and the dashcam
dashcam restarts instead of shutting down.
-
If you want to turn the dashcam on again, insert the power cable.
-
-
For the AI-14 dashcam, scroll down and press Restart dashcam.
A confirmation window pops up.
-