Complete all of the following checks before beginning the installation.
- Turn on the vehicle and confirm that no Malfunction Indicator Lights (MILs), error codes, or warnings are present on any displays. Cycle through messages if needed.
- Verify that all necessary components are present. Record both the AI-14 IMEI number and the device serial number.
- To locate the International Mobile Equipment Identity (IMEI) number, check the printed sticker on the dashcam and on the back of the packaging box. You will need this number for device setup and technical support.
- To locate the International Mobile Equipment Identity (IMEI) number, check the printed sticker on the dashcam and on the back of the packaging box. You will need this number for device setup and technical support.
- Inspect the windscreen for cracks or chips. Obtain client/end-user confirmation before proceeding if damage exists.
- Check the vehicle’s exterior for damage and report any findings before starting.
- Inspect the vehicle’s interior for damage or cleanliness issues. Report any findings before starting.
- Photograph and document any dashcam warnings, windscreen damage, vehicle damage, or missing components. Report as per Step 8.
- Confirm that no third-party devices are connected to the OBD-II port.
- Report any faults or damage to the site contact and/or partner/manager before continuing.