Take these steps to install the dash cam.
Initial Assessment:
-
Check the vehicle for any pre-existing electrical problems or damage and report findings to the owner.
-
Locate the hardwire or OBDII connection point for the power cable.
-
Choose a mounting location that does not obstruct your view or interfere with vehicle controls.
-
Verify the dash cam's view and its ease of removal before marking its final position on the windshield.
-
Clean the marked area, attach the mount, and allow it to dry.
-
Turn off the dash cam.
-
Route the power cable safely from the power source to the mount, hiding it behind the plastic trim.
-
Plug the power cable into the dash cam
-
Place the dash cam on its mounting bracket.
-
Turn on the dash cam and confirm the live video view is correct.
-
Tighten all screws and verify that the power cable and dash cam are securely in place.
-
Ensure the vehicle is operating normally, with no new warnings or changes in performance.