Connect an auxiliary camera to power

Connect the auxiliary camera to 12V or 24V ignition power using the attached power cables via a fuse.

Alternatively:

  • Each auxiliary camera must be fused at the connection point at 2 amps.

  • The red wire is connected to a vehicle ignition circuit.

  • The black wire is connected to the vehicle ground/chassis.

Operating temperature

The following are operating temperatures for the auxiliary cameras:

  • Temperature with infrared on: -4° to 104° F (-20° to 40°C)

  • Temperature with infrared off: -4° to 140° F (-20° to 60° C)

  • Humidity: 20% to 55%, non-condensing

Warning

This installation must be performed by a qualified professional. Working with your vehicle's power system can be dangerous. Consult a professional for guidance.

Was this article helpful?
0 out of 0 found this helpful