-
Take the tamper proof case and specialty screwdriver in hand.
-
Loosen the security screws.
-
Separate the two sections.
-
Place the section with the open slot over the in cab lens on the dash cam.
-
Ensure that the Power cable is routed out of the top cable hole, and the second cable blanking hole cover is still in place.
-
Ensure that the cable is correctly routed within the anti-tamper cover otherwise it could be tampered with causing power disconnection.
-
Slide the second part of the cover on from the round end ensuring that the tamper proof case is securely clipped together.
-
Re-tighten the two security screws with the specialty screwdriver.