Prepare and unbox the AI-14 dashcam

To install the AI-14 dashcam, first make sure you have all of the items you need.

The following items are included in the dashcam box:

  • The AI-14 dashcam, including the mounting bracket, a pre-installed SIM card, and micro-SD cards.

    dashcam-BracketAndPower.png

    Caution

    Take note of the dashcam's IMEI number. The IMEI number is on a sticker on the dashcam itself and on the back of the dashcam box. You will need this number when setting up the dashcam, and also if you need support.

  • T6 torx wrench

    dashcam-torx.png
  • Alcohol wipes

In addition, you should also prepare the following items:

  • A hardwire kit with a vehicle interface cable, purchased from our order form.

  • A cable with three wires and a dashcam connector:

    • A black ground wire for a metal ground bolt

    • A red wire to connect the dashcam to constant power

    • A brown wire to connect the dashcam to ignition power

Note

The wires require a 12V or 24V power source.

Was this article helpful?
0 out of 0 found this helpful