Reboot or unpair the auxiliary camera

The auxiliary camera has a reboot button located on the side of the lens ball.

  • Reboot the auxiliary camera if it is not operating correctly, with problems such as recordings or live video not working.

  • If rebooting does not fix the problem, open a support ticket.

To access the reboot button:

  1. Loosen the two screws at the bottom of the camera.

  2. Move the lens ball around until you find the reboot button.


Hold the reboot button down for:

  • three seconds to reboot the auxiliary camera.

    Rebooting the camera turns it off and then back on.

  • ten seconds to reboot and unpair from the dashcam.

Was this article helpful?
0 out of 0 found this helpful