Reboot or unpair the auxiliary camera

The auxiliary camera has a reboot button located on the side of the lens ball.

Reboot the auxiliary camera if it is not operating correctly, with problems such as recordings or live video not working. If rebooting does not fix the problem, open a support ticket.

To access the reboot button:

  1. Loosen the two screws at the bottom of the camera.

  2. Move the lens ball around until you find the reboot button.

auxCamera_adjustLens.jpg
auxCamera_resetButton.JPG

Hold the reboot button down for:

  • three seconds to reboot the auxiliary camera

    Rebooting the camera turns it off and then back on.

  • WiFi auxiliary cameras, for ten seconds to reboot and unpair from the dashcam

Was this article helpful?
0 out of 0 found this helpful