Connect the dashcam to a power source

To utilize the full features of the AI-12 dashcam, including Standby mode, your dashcam must be connected to a constant 12V or 24V minimum 2A power source. The dashcam should only be connected to a power source using the supplied cables.

The input power connector is located on the side of the dashcam cylinder.

vehicleFuseBox_connectToPowerSource

Note

USB-C can NOT be used to power the dashcam.

You can connect the dashcam to a power source as follows:

When you connect the dashcam to a power source, position the cable as shown.

dashcam-cable-correct.jpg
Was this article helpful?
0 out of 0 found this helpful