Skip to main content
Logo

Help Center

Developer Portal

Partner Ticketing

Business Center

  1. Surfsight
  2. Cameras
  3. Getting started with your Surfsight dashcam

Articles in this section

  • What’s in the box?
  • Mount and install the dashcam
  • Insert and format an SD card
  • Insert and set up a SIM card
  • Mount the dashcam onto your windshield
  • Connect the dashcam to a power source.
  • Hardwire the dashcam to the vehicle fuse box
  • Connect the dashcam to an OBDII port for power
  • Set the dashcam viewing angles
  • Calibrate the dashcam accelerometer
See more

Mount and install the dashcam

Avatar
Rachel Cheyfitz
February 24, 2021 13:31

Refer to this checklist to ensure that all the necessary steps for installation are completed.

Installation checklist

  1. Insert and format your SD card.

  2. Insert and set up your SIM card.

  3. Mount the dashcam to your windshield.

  4. Connect the dashcam to a power source.

  5. Set the road-facing and in-cabin-facing viewing angles.

  6. Calibrate the accelerometer.

  7. Check the live video of the road-facing and in-cabin-facing cameras.

  8. Calibrate for ADAS from the dashcam.

Was this article helpful?
1 out of 1 found this helpful

© Lytx, Inc. 2022