You can set the viewing angles of both the road-facing and in-cab lenses.
To set the view angles:
-
When you are in the parked vehicle with the parking brake on, the ignition on, and the door closed, press the touchscreen of the dashcam to view the PIN screen.
-
Enter the default PIN 3333 to unlock the dashcam for the first time, or your own PIN subsequently.
Note
See Set and manage your dashcam PIN if you need help with your PIN.
-
Press Live View.
Use the arrow keys to toggle between the road-facing and in-cab views.
-
Use the special screwdriver that was included in the box to loosen the three security screws on the round side of the dashcam. Do not remove the screws fully.
-
Adjust the viewing angle of the road-facing lens by rotating the body of the dashcam; then adjust the viewing angle of the in-cab lens by rotating the ring. Make sure all the viewing angles are set correctly.
-
Use Live View to position both the road-facing and in-cab lenses in the proper directions. Use the arrow keys to toggle between the views.
When positioning the dashcam, place it as high as possible on the driver's side of the vehicle.
Important
The dashcam must be installed at least 1.6 meters (63 inches) above the ground for road-facing ADAS.
Caution
Some jurisdictions have regulations that prohibit or restrict where objects can be placed on the windshield. Be sure to comply with applicable law.
Ensure that:
-
there is a clear view of the driver's upper body
Note
When using MV+AI, the driver's upper body must be in view of the in-cab lens.
For more information, see Position the dashcam for MV AI.
-
there is a clear view of the road
-
the dashcam doesn't obstruct the driver's field of vision
-
the dashcam is in the vehicle's wiper path so the road-facing lens is not obstructed by rain or snow
-
nothing in the cab blocks the in-cab lens, such as sun visors, blinds, or mirrors
Note
If the dashcam does not capture the driver’s upper body, place the dashcam below the rearview mirror, as high as possible without obstructing the dashcam's view of the driver.
Caution
Positioning must comply with applicable law for relevant jurisdictions.
Note
When a dashcam is in storage, the battery gets completely drained. Before using the dashcam, you need to charge it for an extended period of time, using at least a 2A power source before turning it on.
-
-
Tighten the side screws when finished. Once the screws are tightened, the two lenses can be tilted forwards or backwards together but not separately.
