Insert the SIM and SD cards into the dashcam

When you receive a new AI-12 dashcam, the SD card is already inserted. The SIM card is either purchased from Surfsight, in which case it's already inserted, or purchased separately and needs to be inserted. You may need to reinsert the SIM and SD cards, or insert new ones.

Note

If there is a tamper-proof case over the SIM and SD card slots, it can be opened with the special screw driver included with your dashcam.

To install the SIM and SD cards:

  1. Use the special screwdriver included in the box when you purchased the dashcam to remove the safety screws that lock it.

  2. Insert the SIM and SD cards, as needed.

    tamper-resistant-cover.png

    Caution

    Only insert a microSIM card. If you insert a different sized SIM card, it can damage the dashcam.

    Watch this video about inserting SIM and SD cards:

  3. Format your SD card.

    1. Press the touchscreen of the AI-12 dashcam to wake it up.

    2. Enter the default PIN 3333 to unlock the dashcam for the first time, or your own PIN subsequently.

    3. Press Settings.

    4. Select Format SD card.

Was this article helpful?
0 out of 0 found this helpful