Bulk events settings

You can customize the events that are triggered for multiple AI-12 dashcams at once.

To set settings in bulk:

  1. Log into the Surfsight cloud app and from the navigation bar, click i-events.png.

  2. Check the boxes next to the individual vehicles or groups of vehicles that have installed cameras.

    The Edit Selected button appears at the top.

    events-dashcams-edit-selected.png
  3. Click EDIT SELECTED.

    A window opens with the Event Settings list.

    bulk-edit-event-settings.png

    The following table describes the events:

    Event

    Description

    Button Pressed

    The driver manually triggers an event when he spots an unusual incident worth alerting about. To manually trigger an event, the driver presses the SOS button on the dashcam.

    De-Acceleration

    The driver reduces speed significantly.

    Acceleration

    The driver increases speed suddenly.

    Violent left turn

    The driver turns left quickly.

    Violent right turn

    The driver turns right quickly.

    Speed Limit

    The driver travels at a speed above the speed limit designated in the cloud. The speed is detected through the GPS.

    Vibration

    The vehicle moves suddenly while in standby mode.

    If this is set as a video event, the recording only begins after the event is triggered, since the camera does not generally record during standby mode.

    Fence

    The driver enters or exits a geofence.

    Distracted Driving

    The driver is generally distracted from the road.

    Tamper

    The tamper-proof case is opened. A magnet under the case is used for detection.

    Power On

    The camera is turned on or woken up from standby mode to active mode.

    Power Off

    The camera is shut down.

    Power Disconnect

    The camera loses power during a trip.

    Smoking

    The driver is smoking.

    Food and Drink

    The driver is eating or drinking.

    Cell Phone Use

    The driver is using their cell phone.

    Driver Unbelted

    The driver does not have their seat belt fastened.

  4. From the scroll down menu next to each event, select how you want the event to be handled.

    cloud-event-settings.png
  5. Click SAVE to apply the changes.

Was this article helpful?
0 out of 0 found this helpful