You can customize the events that are triggered for multiple AI-12 dashcams at once.
To set settings in bulk:
Log into the Surfsight cloud app and from the navigation bar, click .
Check the boxes next to the individual vehicles or groups of vehicles that have installed cameras.
The Edit Selected button appears at the top.
Click EDIT SELECTED.
A window opens with the Event Settings list.
The following table describes the events:
The driver manually triggers an event when he spots an unusual incident worth alerting about. To manually trigger an event, the driver presses the SOS button on the dashcam.
The driver reduces speed significantly.
The driver increases speed suddenly.
Violent left turn
The driver turns left quickly.
Violent right turn
The driver turns right quickly.
The driver travels at a speed above the speed limit designated in the cloud. The speed is detected through the GPS.
The vehicle moves suddenly while in standby mode.
If this is set as a video event, the recording only begins after the event is triggered, since the camera does not generally record during standby mode.
The driver enters or exits a geofence.
The driver is generally distracted from the road.
The tamper-proof case is opened. A magnet under the case is used for detection.
The dashcam is turned on or woken up from standby mode to active mode.
The dashcam is shut down.
The dashcam loses power during a trip.
The driver is smoking.
Food and Drink
The driver is eating or drinking.
Cell Phone Use
The driver is using their cell phone.
The driver does not have their seat belt fastened.
From the scroll down menu next to each event, select how you want the event to be handled.
Click SAVE to apply the changes.