Prerequisites:
-
Make sure the Surfsight auxiliary camera(s) are connected to ignition power.
-
Extension cables are secured with Zip (Cable) ties every one foot (12”/30 cm/300 mm)
-
Make sure the AI-12 is online.
-
Use any device that connects to Wi-Fi, such as a phone or tablet, to check that the AI-12 Dash camera can be found in available Wi-Fi networks (it appears as DASH-XXXX).
-
-
Use any device that connects to Wi-Fi, such as a phone or tablet, to check that the router can find the available Wi-Fi networks (it appears as The SSID name).
Note
For optimum connectivity, install the router as close as possible to the dashcam. Mount the router securely below the dashboard to help protect against normal vehicle vibration, and up off the floor to prevent moisture from entering. To prevent battery drain, wire the router to ignition power. Fuse each camera at 2 Amps with a waterproof fuse holder/ Add-A-Fuse.