Note
The Router and wired/ Ethernet auxiliary cameras can be installed without a relay, but all components MUST be fused separately.
Warning
Never wire the Surfsight device(s) in a manner that shares a connection with another aftermarket product in the vehicle. Independent connections should always be used.
Example of a router installation
The drawing below shows four auxiliary cameras RJ 45 cables attached to the router and secured with Zip (Cable) ties every at 4” (10Cm/100mm) from the RJ45 connector, also that the power cable is zip/cable tied.
Ensure the router is mounted in a generally dry location, above the lower dashboard area.