USA Federal Communications Commission (FCC) Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution
Changes or modifications to this product not expressly approved by Lytx, Inc. could void the user’s authority to operate this equipment.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
It is recommended that the antenna must not be co-located or operating in conjunction with any other antenna or radio transmitter.
Caution
Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Canada – Industry Canada Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003
Cet appareil est conforme aux normes RSS exemptes de licence d’Industrie Canada. Son utilisation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas causer d’interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de provoquer un fonctionnement indésirable.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Caution
Exposure to Radio Frequency Radiation.To comply with RSS 102 RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Pour se conformer aux exigences de conformité 102 RSS RF exposition, pour des configurations mobiles, une distance de séparation d’au moins 20 cm doit être maintenue entre l’antenne de cet appareil et toutes les personnes. Cet appareil ne doit pas être co-localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur.
Europe – Radio Equipment Directive 2014/53/EU (RED)
This product complies with the requirements of the following standard:
EN 301 908-1 V11.1.1 – IMT cellular networks: Harmonised Standard Covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements.
Radio Frequency Exposure
This product complies with the requirements of the following standard:
EN62311:2008 – Generic standard to demonstrate the compliance of electrical apparatus with the basic restrictions related to human exposure to electromagnetic field (0Hz – 300GHz)
E-Mark and CE Mark
This device has both E-Mark and CE Mark, incompliance with UNECE Regulation E/ECE/TRANS/505/Rev.2. This device may be installed throughout Europe and other regions that accept E-Mark or CE Mark as suitable proof of compliance. However, please note that regulations may vary per locality.
|
Country |
Restriction |
|---|---|
|
France |
Outdoor use is limited to 10mW E.I.R.P within the frequency band 2454-2483.5MHz |
|
Italy |
If used outside of own premises, general authorisation is required |
|
Luxembourg |
General authorisation required for public service |
|
Romania |
Individual License is required |
Suppliers Declaration of Conformance
We, Lytx, Inc., hereby declare that the product listed below, to which this Declaration of Conformity relates, is in conformity with the Standards and other Normative Documents listed below:
Manufacturer’s Name & Address:
Lytx, Inc.
9785 Towne Centre Drive
San Diego, CA 92121 USA
Declares that the following product: Product Name: Video Event Recorder Product Model: A1-12
The product specified above carries the marking, by complying with the essential requirements and provisions. Conformity is based upon the following standards:
Manufacturer’s Contact:
Lytx, Inc. 9785 Towne Centre Drive, San Diego, CA 92121 USA
Phone Number: (858) 430-4000 Fax Number: (858) 430-4001
EMC & Radio:
CFR Title 47 FCC Part 15, Subpart B and C, Class B
Industry Canada ICES-003, Class B
Industry Canada RSS-Gen
Industry Canada RSS-210 (applicable only to cellular modem variant)
Industry Canada RSS-247
Mexico IFETEL
Mexico NOM-001-SCFI-19
EU Declaration of Conformity:
2006/42/EC: The Machinery Directive
2014/30/EU: The Electromagnetic Compatibility Directive
2011/65/EU: The restriction of Hazardous Substances Directive
2014/35/EU: The Low Voltage Directive EN62368-1:2014 + A11:2017
UNECE: Regulation 10 E9*10R05/01*16908*00
Lithium Battery: IEC 62133-2:2019