Adjust the viewing angles for both the front and interior views together. Separate lens adjustments are not supported.
Note
Make sure your vehicle is parked, with the parking brake on, the ignition on, and the door closed.
Mount the AI-14 dash cam on the windshield in a way that allows both front and in-cab lenses to rotate freely together. This positioning is crucial for capturing optimal footage from both directions without limiting either lens's view. Ensure the field of view is also set correctly for comprehensive recording.
Warning
Some countries/regions/jurisdictions have adopted, or may in the future adopt, laws that prohibit objects from being mounted on a vehicle’s windshield or other locations in a vehicle. Always refer to any applicable laws that concern mounting devices on vehicle windshields before choosing a mounting location. You are responsible for complying with such laws, as Lytx, Inc. does not accept responsibility for your failure to do so.
Important
Install the dash cam at least 1 meter (39.3 inches) from the ground to ensure proper operation of the road-facing ADAS capabilities.
Follow these steps to set the view angles:
Note
Make sure your vehicle is parked, the parking brake is on, the ignition is on, and the door is closed.
Now that the AI-14 dash cam has power, sit in the driver's seat to identify the best mounting location. Operate the sun visors, rear-view mirrors, and any other movable accessories. Ensure the dash cam's placement does not obstruct your view of the road and provides a clear, unobstructed view of both the road ahead and the driver, as per our guidelines.
-
Use the Torx wrench to loosen the Torx T6 screw where the mounting bracket meets the dash cam body.
-
Press the touchscreen of the dash cam to view the PIN screen.
-
Enter the default PIN 3333 to unlock the dash cam for the first time, or your own PIN subsequently.
Note
See Set and manage your dash cam PIN if you need help with your PIN.
-
Press Live View.
Use the arrow keys to toggle between the road-facing and in-cab views.
-
Position the dash cam and bracket on the windshield to check the view, without peeling off the mounting tape.
Note
Configure the virtual ignition in the AI-14 dashcam. Virtual ignition offers two approaches to activating the AI-14 dashcam:
-
Movement – When the virtual ignition feature is enabled, the dashcam is activated when it detects movement.
-
Ignition – When virtual ignition is turned off, the dashcam relies solely on true ignition for activation. This means the AI-14 dashcam will only turn on when the ignition key is turned, overriding the movement-based activation.
-
-
Use Live View to view the position of both the road-facing and in-cab lenses, in each direction. Use the arrow keys to toggle between the views.
You can adjust the viewing angles of both lenses by rotating the body of the dash cam.
Warning
Some countries/regions/jurisdictions have adopted, or may in the future adopt, laws that prohibit objects from being mounted on a vehicle’s windshield or other locations in a vehicle. Always refer to any applicable laws that concern mounting devices on vehicle windshields before choosing a mounting location. You are responsible for complying with such laws, as Lytx, Inc. does not accept responsibility for your failure to do so.
-
Tighten the screw where the mounting bracket meets the dash cam when finished. Once the screw is tightened, the two lenses are locked into place.
-
Mark the edges of the bracket on the windshield with non-permanent marker.